Gerber GS750 User Manual download pdf (Page 40)

32 GS750

plus

BLADE REPLACEMENT

Five carbide knife blades are included with the GS750

plus

! one installed in the tangential knife holder

! two tangential knife spares

! one installed in the swivel knife holder

! one swivel knife spare

Extra blades and special angled blades for sandblast vinyls are

available from your Gerber distributor.

WARNING: The blade is very sharp. Take care when

handling the knife holder and blade.

CAUTION: Blades are fragile and can break. Do not use

tools to handle new blades.

The replacement procedures for the tangential and swivel knife

blades are different.

To replace the tangential knife blade

1. Loosen hex screw with the Allen wrench from the tool kit.

2. Carefully remove the old blade.

3. Install the replacement blade in the slot provided, not riding up

on either edge.

4. Gently seat the flat end of the blade against the pin stop with

the blade point toward the center of the tool. Retighten the hex

screw.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 82 83

No comments

Gerber GS750 User Manual Page 40