Gerber GS750 User Manual download pdf (Page 65)

Plotter Adjustments 57

Troubleshooting Guide

This chart of symptoms is designed to help identify the possible

problem and the probable adjustment procedure.

CAUTION: Turn off GS750

plus

plotter and GRAPHIX

ADVANTAGE or other sign design system before checking

connections or attempting to make any adjustments, unless

otherwise directed.

Symptom Recommended Procedure

No power

1. Check power cable and plugs.

2. Check on/off switches.

3. Check fuse.

Poor Performance Perform routine cleaning and lubrication.

Plotter Error Press Reset on the plotter. Verify and

resend the job.

Inconsistent Tool/

Material Contact

1. Clean spindle bore and tool holder.

2. Change knife blade.

3. Check for proper Z home.

4. Perform Z Axis Adjustment for Tool

Height.

Jagged or

Serrated Cutting

Edges

1. Replace the knife blade.

2. Check for proper theta home. If

improper, do theta adjustment

Thick and Thin

Strokes

Check in this order:

1. Material alignment in sprockets

2. Blade position in knife holder.

If the condition still occurs in NORMAL

mode (see "GRAPHIX ADVANTAGE

Reference"), perform the X Axis

Backlash Adjustment.

If the condition occurs when AXIS

SWAP in the GRAPHIX ADVANTAGE is

on, make adjustments in this order:

1. Y-axis (Backlash) Adjustment.

2. Drum End Play Adjustment.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 82 83

Comments to this Manuals

No comments

Gerber GS750 User Manual Page 65

Comments to this Manuals

Related products and manuals for Unknown Gerber GS750